the flexible assistance call system for your staff and the general public alike
The Assistance Call System (ACS) is ideal for use in all types of private, commercial, residential and public sector buildings, allowing the general public, a member of staff or a patient to call for assistance. The system confirms a call has been generated and ensures the caller is visited. It is hard wired for total reliability, only requiring two common wire connections to operate the addressable network, allowing the system to utilise any existing wiring.
The flexibility of the ACS allows the call system to be used in many different applications.
– combined power supply and LED display supporting up to 32 call points indicating 2 seperate levels of call (call and emergency), c/w backup battery, mute and reset buttons.
ACS22 call point
– with 2 levels of call (call & emergency). Call & Reset can be made from this panel. A magnetic reset version
is also available.
ACS22D door monitoring point
– used to protect doors to generate an alarm on the system when opened without authorisation.
ACS42 overdoor light room controller
– acts as the call address and overdoor light/sounder in one unit. Ideally used in conjunction with a ceiling pull (ACS1) and a reset point (ACS/RP). A comprehensive range of overdoor lights are available.
ACS18 LED display unit
– standard display used to alert staff where assistance is required, indicating 2 separate levels of call (call & emergency).
ACS1 ceiling pull switch
– ideal for toilets and bath areas.
3 metre length of cord with easy to operate ‘G’ style pulls and twin re-assurance indicators.
ACS/TIR infra red triggers
– must be used in conjunction with an infra red receiver (ACS/IR) connected to an addressable device. Typically this will cover a room area of 20sq meters, always perform a site test first.
ACS/AP alert push
– a low cost panic button that can be used anywhere calls need to be raised.
