|
NP2 and NP4 pear leads
– if a resident needs access to your call system when they are away from their call point, these attractively styled pear leads are the perfect solution. They are available in 2-metre and 4-metre lengths and the right-angled jack plug reduces the chance of damage by furniture movement. Each unit is supplied complete with a clip fastener, so the unit can be attached to clothing or bed sheets if necessary. In the event that a lead is pulled out of its socket, a standard alarm call is generated.
|
|
|
PS1 plug in pull cord
– for applications where a pull cord would be more convenient than a pear lead, the PS1 Plug in Pull Cord enables a call to be generated by the use of a pull string action. This simply plugs into the jack socket of any Intercall Call Point and is supplied with a 30cm cord, and an easy to see orange pull. With the unit installed, a call can be generated by either the call button or the plug-in pull cord.
|
|
|
PM1 pressure mat
– the PM1 is a standard pressure mat which activates a standard call when pressure is applied to the mat. It should only be placed under a mat or carpet as it is not designed to be walked on directly. It is supplied complete with a four-metre lead and a right angled jack plug. The surface area of the mat measures 300 x 600 mm.
|
|
|
S2 water resistant air switch
– the S2 Air Switch is ideal for environments such as bathrooms and showers where water could make contact with the system. It is totally sealed and waterproof and, since it uses air to trigger a call,
it is completely safe to use. The S2 Air Switch is fitted with a clip fastener so it can be attached easily to a shower curtain or towel, and the unit will generate a standard call should it be removed from the jack socket.
|
|
|
BC1 breath switch
– even the most severely handicapped people can have access to your call system with the
BC1 Breath Switch. It operates in a similar way to the pear leads and the air switch above, by generating a standard call, and plugs into the jack on all Intercall call points. It is supplied with detachable mouth-pieces which can
be sterilized.
|
|
|
TIR4 infra red trigger
– designed to be worn by residents or staff and enables calls to be generated remotely from the call point. This is ideal in lounges or common rooms where each resident can be given a trigger to allow access to the call system. The TIR4 requires an infra red enabled call point to operate (such as an L722 or an L752). When using the TIR4 with an integral 700 system, it is possible to identify the call location and the individual caller.
|
|
|
CS1 ceiling pull switch
– specifically developed to give alarms from bathrooms and toilets. The unit is ceiling mounted and features a floor length cord terminated with two easy to use G loops. It also incorporates twin integral reassurance indicators, which flash to confirm a call has been generated.
|
|
|
PIR1 passive infra red bed monitor
– if you need to monitor a resident’s bed and alert staff when he or she is on the move, the PIR1 bed monitor will detect movement and alert the staff. However, the bed itself is ‘masked’ out of the range of the detector so that it only monitors movement outside the bed area. Any movement within the receiver’s range will activate a call, and trigger the call point.
|
|
|
RAP alphanumeric pagers
– for applications where you need to connect alphanumeric pagers to the system,
the L747 Universal Interface offers simple, convenient connections. The pagers display all calls made on the system as they would appear on the display unit, showing the exact location of each call in full alphanumeric text. With the CMS Lite PC Software, you can configure your system to allow individual pagers to respond to specific calls, making it possible to either zone the building by area, or by call type. There is also a day/night mode available so that pagers can be programmed to respond to different calls at set times during the day or night.
|
|
|
CMS lite call management software
– if you need to record and store all Intercall system activity on your personal computer, the CMS Lite Call Management software is the ideal solution. It gives you immediate access to the call history of a resident, so you can maintain more accurate and timely control of your entire care home. Staff pagers can also be controlled from your computer, allowing free text messages to be sent to individual pagers.
|
|
